U-values Options

The U-value of KOREFill is only limited by the width of the cavity. A 110mm cavity built with 2000kg blocks will achieve a U-value of 0.27 W/m²K while a 150mm cavity will achieve 0.20W/m²K.

Superior Thermal Insulation equals Money Saving

The KOREFill bead is suitable for application in new and existing buildings. Thirty five percen of heat loss in a building is through the walls. Where KOREFill is installed occupanst will benefit from a home that is easier to heat and retain while at the same time reducing the volume of heating fuel required.

Cavity Benefits

The installation of KOREFill does not hinder the function of the cavity. The natural matrix formed by the bead means that mositure that penetrates the outer leaf will not travel through the cavity to the inner leaf. The water by natural gravity will flow to the weep holes at the bottom of the cavity. The bead bond together in a honeycomb type formation allowing air to circulate and the cavity to breath.

Product Performance

The KOREFill System is rot-proof, water repellent, and durable and will not degrade over time. It will not prejudice the fire resistance properties of the wall. Once installed properly the KOREFill System will preform consistently for the life of the building.

Installation Benefits

KOREFill is only installed by fully trained and accredited installers. As a client you will not have to handle the product in any way. There is no site storage ot watse facilities required and the installers bring their own specialised machinery and equipment. The installation process will take no more than a day (weather permitting).

Compliance with Building Regulations

KOREFill satisfies all necessary compliance issues regarding Building Regulations 1997 to 2007. Part L requires a minimum U-value of 0.27W/m²K for wall construction. KOREFill easily satisfies this requirement.

Site Storage

The KOREFill product does not need to be stored on site. The installer will arrive on site and the product is installed directly from the KOREFill truck into the cavity. The client will not have to handle the product.

Site Machinery

The client does not need any specialist equipment or machinery on site. The KOREFill installers are fully equipped with their own equipment.

No On–Site Waste

The KOREFill installer fills the cavity directly from the KOREFill truck and as such there is no material or packaging waste from the process. Any excess material remaining in the trailer once the fill is complete is removed by the KOREFill Installer.

Fill Certainty

The installation equipment and technique is designed to guarantee that every meter squared of the wall is completely filled. The client can be one hundred percent certain that the walls of the building are completely filled with insulating material.

Time Saving

As the placement of the insulation is no longer the responsibility of the block layer the block walls will be finished much more quickly. Once the building is sealed from the elements the KOREFill Installer will fill the cavity with the insulation.

Certification

The KOREFill System has been independently assessed by the Irish Agrement Board (Certificate No 07/0293) and KOREFill have a number of fully accredited and registered specialist installers nationwide. The system of pumping cavities with insulation is fully accepted by Homebond and Premier Guarantee. List of KOREFill Installers

{snippet backToTop}