Technical Data Sheet
 Download a copy of KORE Fill Technical Data Sheet. For Further infomation please contact our technical team.
U-VALUE CALCULATION
The thermal performance of KORE Fill is only limited by the width of the cavity, the wider the cavity the greater the U-value that can be achieved.
Cavity Width
KOREFill(mm)
|
Render 1300 kg/m³
Block 2000 kg/m³
Block 2000 kg/m³
Plaster 1200 kg/m³
|
Render 1300 kg/m³
Block 650 kg/m³
Block 2000 kg/m³
Plaster 1200 kg/m³ |
Brick 1700 kg/m³
Block 2000 kg/m³
Plaster 1200 kg/m³
|
Brick 1700kg/m³
Block 650 kg/m³
Plaster 1200 kg/m³
|
| 50 |
0.52 |
0.42 |
0.51 |
0.43 |
| 55 |
0.48 |
0.40 |
0.47 |
0.40 |
| 60 |
0.45 |
0.38 |
0.44 |
0.38 |
| 65 |
0.42 |
0.36 |
0.41 |
0.36 |
| 70 |
0.39 |
0.34 |
0.39 |
0.34 |
| 75 |
0.37 |
0.32 |
0.37 |
0.32 |
| 80 |
0.35 |
0.31 |
0.35 |
0.31 |
| 85 |
0.33 |
0.29 |
0.33 |
0.30 |
| 90 |
0.32 |
0.28 |
0.31 |
0.28 |
| 95 |
0.30 |
0.27 |
0.30 |
0.27 |
| 100 |
0.29 |
0.26 |
0.29 |
0.26 |
| 105 |
0.28 |
0.25 |
0.28 |
0.25 |
| 110 |
0.27 |
0.24 |
0.26 |
0.24 |
| 115 |
0.26 |
0.23 |
0.25 |
0.23 |
| 120 |
0.25 |
0.22 |
0.25 |
0.23 |
| 125 |
0.24 |
0.22 |
0.25 |
0.22 |
| 130 |
0.23 |
0.21 |
0.23 |
0.21 |
| 135 |
0.22 |
0.20 |
0.22 |
0.20 |
| 140 |
0.22 |
0.20 |
0.21 |
0.20 |
| 145 |
0.21 |
0.19 |
0.21 |
0.19 |
| 150 |
0.20 |
0.19 |
0.20 |
0.19 |
| 155 |
0.20 |
0.18 |
0.20 |
0.18 |
| 160 |
0.19 |
0.18 |
0.19 |
0.18 |
| 165 |
0.19 |
0.17 |
0.18 |
0.17 |
| 170 |
0.18 |
0.17 |
0.18 |
0.17 |
| 175 |
0.18 |
0.16 |
0.17 |
0.16 |
| 180 |
0.17 |
0.16 |
0.17 |
0.16 |
| 185 |
0.17 |
0.15 |
0.17 |
0.16 |
| 190 |
0.16 |
0.15 |
0.16 |
0.15 |
| 195 |
0.16 |
0.15 |
0.16 |
0.15 |
| 200 |
0.15 |
0.14 |
0.15 |
0.15 |
Note: It is assumed that cavity walls containing full-fill bonded bead will be constructed in accordance with the requirements of the 1997 to 2007 Building Regulations.
PHYSICAL PROPERTIES
| Properties |
Units |
KORE FILL BEAD
|
| Thermal Conductivity |
0.033W/mK |
| Density |
12kg/m³ |
| Bead Size |
3-8mm |
INSTALLATION
The bead and bonding agent is injected, through drill holes, into the cavity using specifically designed equipment. The material packs to a uniform density inside the cavity. Once the proper drilling pattern and injection sequence is followed the cavity wall will be completely filled.
Installation of the KORE Fill Cavity Wall Insulation must only be carried out by Airpacks Ltd or by our approved installers. View Airpacks Ltd Approved Installers List.
|
